Conical twin screw extruder Cincinnati Konos 50P

Output rate: 40 – 125 kg/h
Motor: 22 kW (AC-drive)
Control system: EXc Pro-XP
Horizontal dosing feeder incl. hopper & material dosing system
Degassing unit incl. vacuum filter
5 +1 heating zones for tooling & adapter
Adapter incl. melt pressure & melt temperature sensors
Machine dimensions (l x w x h): 3.000 x 1.600 x 2.300 mm, weight: 2.300 kg

Calibrating table Greiner get.CAL 7,0-4P/1Z

Clamping length: 7.000 mm
Middle distance between T-slots: 320 mm
Clamping height: 940 – 1.040 mm (electrically adjustable)
Lateral adjustment: +/-25 mm (electrically adjustable)
4 pcs of vacuum pump for dry calibration, extractable á 4 kW / 125 m³/h
incl. 40 pcs V-connections 1/2"
1 pcs of cyclone unit consisting of:
1 pcs of vacuum pump 4 kW / 125 m³/h
1 pc of cyclone pump 1,1 kW / 15 m³/h
4 pcs D50 connections
incl. calibration tanks
Machine dimensions (l x w x h): 7.000 x 1.100 x 1.100 mm, weight: 2.200 kg
Rails length: 7.800 mm

Caterpillar haul-off Greiner get.PUL 30/9-235

Max. profile dimensions (w x h): 300 x 100 mm
Contact length caterpillars: 2.300 mm
Haul-off speed: 0,2 – 9 m/min
Haul-off force (at 6 m/min): 30 kN
Operation height: 1.040 – 1.140 mm (manually adjustable)
220 pcs of rubber pads: 235 mm wide, 60 mm high (upper + lower)
Machine dimensions (l x w x h): 3.500 x 1.100 x 1.700 mm, weight: 1.800 kg

Greiner GFU 400 SS

to apply a protection foil on the profile (bottom & top surface)
vertically installed at the haul-off
Max. profile dimensions (w x h): 400 x 100 mm
Machine dimensions (l x w x h): 450 x 550 x 1.190 mm, weight: 95 kg

Cutting device Greiner get.CUT C/235/QC

Cutting width: up to 300 mm
Cutting height: up to 100 mm
Cutting speed: 0,2 – 9 m/min
Motor: 0.75 kW
Operation height: 1.040 – 1.140 mm (manually adjustable)
Length measuring: activation for cutting via Hengstler counting
Machine dimensions (l x w x h):  1.500 x 1.100 x 1.700 mm, weight: 800 kg

External chip exhauster Greiner

Suction capacity: 2.460 m³
Suction power: 2.2 kW
Machine dimensions (l x w x h): 1.200 x 600 x 1.355 mm, weight: 150 kg

Tilting table Greiner GTT 6,0

Max. profile dimensions (l x w): 6.000 x 420 mm
Working height: 1.040 – 1.140 mm (adjustable)
Machine dimensions (l x w x h): 5.800 x 1.100 x 1.125 mm, weight: 350 kg